And So It Begins

Wednesday, December 13, 2023 I wrestled the big rock out of the pile, and got it propped up at the bottom of an  eight foot long ramp of 3/4 inch plywood laid over a robust length of 2X6 board. But that was as far as I got. The rock weighs 125 pounds. I can drag and shove it around the ground, but I do not have the juice to lift it. Nor did I have the juice to work it up the ramp to the tabletop. I had to wait for Thursday when Juan came by to take care of our lawn. Even so, it did take the two of us to get the rock safely up on the table. Here it is:

And now I'm faced with a new set of problems, in getting this project underway. Ususally, the first step is to grind the surface of the rock smooth with the angle grinder. But that would mean picking it up off the table, and taking it out into the yard... No can do. Same with setting a flat base. The rock does have a flat surface, but, again- it's too heavy to do what I usually do.

So the first few steps are going to be fairly big excavations. You can see the drill hole at the left end of the base. That hole runs almost all the way across the width of the stone, and it's going to mark the outside edge of the base cut. I already tried sitting the stone flat with that straight drill line hanging off the edge of the pavement. It's quite stable, and will make for a nice, roughly round foundation for the sculpture. There's going to be some serious rock-breaking, and  heavy work with the bow saw, and point chisel coming up. Once I've cleared about thirty five, or forty pounds of rock away, I'll have something a little easier to manipulate.

This is going to be a long series. It's Friday night as I sit here typing, just putting a cap on a long day. Today was lost to housework, because tomorrow, Saturday, we're doing our Christmas open house/potluck thing. Maybe Sunday I can strike the first blows on this monster.